- #Meade autostar controller not working serial#
- #Meade autostar controller not working upgrade#
- #Meade autostar controller not working for android#
♦ 3 LEDs, Transmit/Received data, Power/Connection Status, Low/Full/Charge mode battery. ♦ High Power (Class 1) 100 Meter Bluetooth radio with integrated Antenna. ♦ Baudrates from 1200 to 232k bps, and non-standard values, defaults to 9600 or 115200.
#Meade autostar controller not working serial#
♦ Settings can be easily changed with AT commands via serial port and remotely over Bluetooth. ♦ Very low power, programmable discovery and Sniff modes(1-10 mA standby, 5-30 mA connected) ♦ DB9 male with onboard jumpers swap DCE/DTE eliminates need for crossover cables. ♦ Bluetooth Specification 2.1 (with EDR high data rate) compliant, also compatible with 1.1/1.2. ♦ Smart On/Off switch with programmable auto-off timer for battery life optimization. ♦ Takes power from Pin 9 and can trickle charge batteries from this Pin (5 V DC required). ♦ Sockets for 2 standard AAA Batteries, any types can be used: Alkaline, NiMH recharge, others. ♦ Power is at pin 9 and 5 volts is max input These telescopes have USB or Ethernet interfaces, which cannot be physically connected to a bluetooth or Wi-Fi adapter. SkyBt does NOT support USB only telescopes: Meade LS series, iOptron GOTONova 84 controllers, the Generation III ServoCAT, Vixen mounts with StarBook controllers, and the very latest Sidereal Technology USB controllers.
#Meade autostar controller not working upgrade#
Contact Meade to upgrade your controller. To make SkySafari work with these scopes, you need to replace the #494 Autostar controller (which does not have a serial port) with the #497 Autostar (which does). Note: Some Meade ETX models (60/80) ship with the Autostar #494 controller. ♦ Lumicon SkyVector, Takahashi Super Navigator, Dave Ek Box ♦ Tangent Instruments BBox, JMI NGC-MAX, Celestron AstroMaster ♦ Astro-Physics GTO, Losmandy Gemini, Vixen SkySensor 2000 ♦ ServoCAT Argo Navis, Sky Commander, Losmandy DSC ♦ SkyWatcher mounts with SynScan controllers ♦ Orion Sirius, Atlas, SkyView Pro, SkyQuest XTg ♦ Celestron NexStar 4/5/8, 5i/8i, GPS, SLT, SE
♦ Meade LX-90, ETX, LXD, LX-400 ACF with AutoStar #497 controllers Suitable telescopes Models that have been tested and are known to work with SkySafari include:
#Meade autostar controller not working for android#
Note: SkyBT® may also be used with the fantastic SkySafari OSX on an Apple Macintosh computer! Apple´s iOS device users should opt for SkyFi® for purposes of telescope control as SkyBT® is intended for Android only. SkyBT is a Class 1 Bluetooth device with a typical range of around 100 meters, far more than cheaper bluetooth adapters. You can expect to get 8-10 hours of scope control out of a set of fresh batteries. SkyBT runs off of two AAA batteries (alkaline or rechargeable) and has a built-in recharging circuit. After pairing your Android device with SkyBT and tapping Connect in SkySafari, SkyBT is automatically configured with the proper settings for talking to your telescope mount. I’ve tried new batteries, reset, motor calibration, motor training, and a different Autostar controller but none of those have solved the problem. The horizontal drive works properly at all speeds.
Selecting any speed from the Autostar controller results in max speed movement. SkyBT BlueTooth Telescope ControllerSkyBT® is a NEW solution for wireless telescope control for use with SkySafari on Android devices! Smaller than a business card, it easily attaches to RS232 serial ports via a DB9 male connector. The alt motor drive on my Meade DS-2130 operates only at max speed.
0 kommentar(er)
